-
- News
- Books
Featured Books
- pcb007 Magazine
Latest Issues
Current IssueThe Sustainability Issue
Sustainability is one of the most widely used terms in business today, especially for electronics and manufacturing but what does it mean to you? We explore the environmental, business, and economic impacts.
The Fabricator’s Guide to IPC APEX EXPO
This issue previews many of the important events taking place at this year's show and highlights some changes and opportunities. So, buckle up. We are counting down to IPC APEX EXPO 2024.
Getting to Know Your Designer
In this issue, we examine how fabs work with their design customers, educating them on the critical elements of fabrication needed to be successful, as well as the many tradeoffs involved. How well do you really know your customer? What makes for a closer, more synchronized working relationship?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - pcb007 Magazine
Lead-free Reflow for High-layer-count PCBs
June 17, 2014 | Happy Holden, Retired, and Michael Carano, OMG Electronic Chemicals, LLCEstimated reading time: 1 minute
This article is an update of the Holden-Carano article originally published in the February 2013 issue of The PCB Magazine.
Abstract
One of the most difficult printed circuit boards to adapt to Pb-free assembly processes is the high-layer count multilayer. Often, these multilayers have through-hole and hand-soldered components, and requirements for two or more rework cycles. The higher reflow temperatures and slower wetting of lead-free solders place an enormous strain on the laminate and copper-plated hole barrel. In many cases, the boards cannot be assembled reliably even with newer, higher thermal performance FR-4s.
One solution to this problem is to redesign the multilayer using current design rules and newer innovative fabrication technologies. This article will review four of these new and enabling technologies:
- Laser-drilled microvias;
- Routing BGA using channels;
- Contribution of new SMT connectors; and
- Layer assignment changes (architectures).
Microvias offer the most significant opportunity to reduce not only the layers and thicknesses of multilayers, but also their cost while improving their electrical performance and density. Several examples will illustrate these new opportunities. Since blind vias are surface phenomena, to get the maximum benefit from them, layer assignment for signal, ground and power need to be reviewed and alternative constructions considered. These blind vias, by reducing the number of through-holes, contribute to increase routing density that allows the lower layer usage. Finally, by replacing through-hole connectors with surface mount connectors, higher connector density and improved electrical performance can be realized.
The resulting new multilayers are not only thinner, cheaper, and easier to design, but are less costly and suitable for lead-free assembly.
Read the full article here.
Editor's Note: This article originally appeared in the April 2014 issue of The PCB Magazine.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.